Multi-layer flooring with a thickness of 1.5-3mm.
This flooring is used on surfaces that are sound and without defects.
Any imperfections can be taken care of with appropriate products.
Standard UNI 11146 - UNI 10966 - UNI 8298-1

DESCRIPTION
Structural monolithic floor with medium strength resting on ballast. Thickness of approx. 1.5-3.0mm of multi-layer synthetic resin applied to the concrete plate which is dry and has been roughened mechanically.

WHERE IT IS APPLIED
Suitable for loads (l) and operations (L) (See DIN Standard 1100) Food industries, wine industries, oil mills, slaughterhouses etc..

SPECIFICATION FOR THE DESIGN
CHEMIDUR FX monolithic industrial flooring comprising:

1. PREPARATION
   Prepare the application surface by using mechanical equipment and dust extraction
2. SURFACE LAYER
   Application of epoxy and quartz primer. A mixture based on spheroidal quartz and hard minerals with a homogeneous granulometric curve of between 0.125 and 1.5mm and synthetic resins with two coats of quartz dusting allowing at least 24 hours between each coat and final saturation
3. LOAD BEARING CONCRETE PLATE
   Cured concrete plate (Formulated and reinforced concrete to achieve the performance required by the design of the project. Resistance, durability and controlled shrinkage are basic elements of DURSICAL). Thickness and reinforcement requires a design project
4. SEPARATION BARRIER
   PVC isolation layer between the base and the flooring Separation from the elevated structures
5. SUPPORTING BASE
   Soil stabilised using the Westergaard method